Window tints allow you to add more style and protection to your home. While it may not be easy to install and maintain, it would all still be worth it, as the overall aesthetics of your property would be further improved with its help. That said, there may come a time when it may get damaged due to multiple circumstances.

If you want to fix your window tint bubbles, feel free to take note of our step-by-step guide below.

 

Step 1: Identify the Types of Bubbles

The first thing you should do is identify the types of bubbles you are dealing with. There are three common types:

Cold emulsion type bubbles: These bubbles may appear after a day or two or after some weeks or months. They are usually small and can’t be seen once the tint is fully installed. Cold washout bubbles: These bubbles are bigger and will be seen after a few days to a week. They will get smaller over time. They range from the size of a pinhead to the size of a dime. Warm emulsion type bubbles are the most common type among window tint bubbles. It is larger than the cold emulsion type, and it looks like a swollen bubble.

 

Step 2: Apply Heat

Now, you can start by removing the window tint bubbles by applying heat. You will need a heat gun, which can easily be bought from any local hardware store. Frequently turn the heat gun on and off to avoid reheating the tint.

While heating the bubble, keep on checking if the bubble becomes smaller. This is an indication that the tint is being washed out. If the bubble does not get smaller, it means there is still film left on the surface, and you need to apply more heat.

 

Step 3: Remove the Window Tint Bubbles

Once you are sure that the tint film has been washed out, the heat will no longer be needed. All you have to do is peel off the tint film that is no longer adherent to the window.

If you are looking for another solution, you can scrape off the tint with a razor blade. When you see that the bubbles have been removed, you can stop.

 

Step 4: Apply a Thin Coat of Tint Film

Now, you need to apply a thin coat of tint film to the window and spread it. While you are doing so, make sure that the bubble is completely covered. If you want to apply more than one coat, feel free to do so.

 

Step 5: Heat the Window Tint Bubbles Again

After you have applied the film, wait for a few minutes before heating it. Heat the tint once again and check if the bubble disappears. If it does, it means that it has been washed out.

You have to do this until all the bubbles are removed. It is crucial to cover the entire window in order to avoid additional bubbles from forming.

 

Step 6: Cool Down

When you are done, make sure to cool down the window by letting the tint dry. You may have to use a hairdryer to dry it faster.

If you are still not sure if you have done the job right, you can use a razor blade to scrape off the tint. If the tint has been removed, all that you have to do is to clean it and then apply a new tint film.

 

Conclusion

Window tint bubbles may not be an easy problem to fix, but they can be done with the right equipment and instructions. If you have some experience with tinting windows, then you will be able to fix them quickly. If not, you can still follow the steps above to achieve the best result possible.

With all of that being said, if you are looking for a great source of house window tinting in Melbourne, look no further than our amazing selections here at NuVision Solutions. We are the leading 3M Window Film supplier and Installer in Greater Melbourne and part of the largest 3M distribution and installation network in Australia. Call us today and let us provide that well-needed tint for your home in no time!